Arm Port Plug
The Arm Port Plug will fit tightly into the arm hole of both the Aluminum Glove Box and Polymer Glove Box to make an airtight seal when the gloves are being changed, or whenever the gloveless sleeves are idle.

Atmostphere Filter System
This recirculating system will control contamination of particles 0.3 micron and larger.

Fan Boxes
Coy Laboratory Products catalyst boxes come in two styles, heated and unheated.

Chiller
The Chiller accessory is designed to maintain a temperature at or below ambient temperatures in a glove box.

Dehumidification Apparatus
Used alone or in conjunction with a Coy Automatic Humidity Controller, this unit dries the atmosphere in a the glovebox.

Dry Gas Purge System
This system is an alternative way to dehumidify a glove box through a purging procedure with a dry nitrogen gas or dry argon.

External Mount Lamp
The lamp is a standard four foot fluorescent fixture housing two 40-watt tubes.

Flaming Device
This incandescent unit will "flame" a bacteriological loop and the edge of a culture tube.

Forced Air Incubator
The incubator has been custom engineered for use where shelf or bench space is at a premium.

Gas Injection System
Maintains a constant level of hydrogen gas mix in your COY Anaerobic Chamber.

Humidification Apparatus
The Apparatus consists of a fan assembly with an absorbent wick inside the chamber and a water reservoir with circulating pump outside the glove box.

Humidified Incubation Box
The accessory allows cultures to be humidified with the same atmosphere content (gas and temperature control) inside a Hypoxic or Anaerobic glove box, while at the same time not affecting the rest of the glove box.

Humidity Controller
Regulated humidity levels from 3-100% RH can be obtained using this controller in conjunction with the humidification and dehumidification accessories in the COY Humidity Control Glove Box.

Microscope Sock
This flexible vinyl sock fits directly over the eyepieces of your microscope, allowing them to extend through the wall of the glove box for easier use.

Moisture Trap Assembly
This accessory is designed to prevent moisture being drawn into the Vacuum Pump.

Oxygen and Hydrogen Analyzer
Both the oxygen and hydrogen levels can be constantly monitored by this one analyzer.

Oxygen Controller
Ideal for hypoxic or hyperoxic applications. This will automatically maintain oxygen levels in your Hypoxic (oxygen control) Glove Box in the range 0% - 60% (monitors up to 100%).

Shelf Assembly
Coy manufactures shelving to fit the precise requirements of the glove box.

STAK-PAK
Control oxygen and humidity

Workbench
These rugged benches are for work of all types.